DOWNLOAD the newest PrepAwayExam 300-420 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1r3OSLGOeqBF9_RXy4mtP5u7Ja3Ex4FE2
For your convenience, PrepAwayExam has prepared Designing Cisco Enterprise Networks exam study material based on a real exam syllabus to help candidates go through their exams. Candidates who are preparing for the 300-420 Exam suffer greatly in their search for preparation material. You would not need anything else if you prepare for the exam with our 300-420 Exam Questions.
Intended Audience for Cisco 300-420
There are no formal prerequisites for the Cisco CCNP Enterprise but it is recommended that candidates should have at least 3 to 5 years of networking experience. This is because a lot of practical skills are tested during the exams, including 300-420. So, all you need is some underlying networking knowledge so that you have a basic understanding of everything that is being discussed.
Cisco 300-420 exam is a challenging exam that requires a significant amount of preparation and study. 300-420 exam consists of 60-70 questions and has a duration of 90 minutes. The questions are designed to test the candidate's understanding of the design principles and best practices for enterprise-level networks. 300-420 exam is computer-based and can be taken at any authorized Pearson VUE testing center.
Cisco 300-420 exam is a 90-minute test that consists of 60-70 multiple-choice questions. To pass the exam, candidates must demonstrate their proficiency in designing and implementing complex enterprise-level networks. 300-420 exam is available in English and Japanese and can be taken at any Pearson VUE testing center around the world. Successful completion of 300-420 exam demonstrates that an IT professional has the skills and knowledge necessary to design and implement complex enterprise networks that meet the needs of modern businesses.
Real Exam Experience with the Cisco 300-420 Practice Test
For candidates who buy 300-420 test materials online, they may care more about the privacy protection. We can ensure you that your personal information such as your name and email address will be protected well if you choose us. Once the order finishes, your personal information will be concealed. Furthermore, 300-420 exam braindumps are high-quality, and we can help you pass the exam just one time. We promise that if you fail to pass the exam, we will give you full refund. If you have any questions for 300-420 Exam Test materials, you can contact with us online or by email, we will give you reply as quickly as we can.
Cisco Designing Cisco Enterprise Networks Sample Questions (Q177-Q182):
NEW QUESTION # 177 
Refer to the exhibit. A customer needs to apply QoS to the network management traffic passing through the GigabitEthernet0/2 interface. All eight queuing classes are in use, so the new requirement must be integrated into the existing policy. Which solution must the customer choose?
- A. Mark traffic to DSCP CS5 and assign it to the SIGNALLING class. Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the SIGNALLING class.
- B. Mark the traffic to DSCP CS2 and assign it to the ROUTING class Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the ROUTING class
- C. Mark the traffic to DSCP CS4 and assign it to the SIGNALLING class. Then, prioritize traffic within the class.
- D. Mark the traffic to DSCP CS6 and assign it to the ROUTING class Then, prioritize traffic within the class.
Answer: B
NEW QUESTION # 178
Refer to the exhibit.
An architect must design an IPv6 migration solution for an enterprise customer to support these requirements:
* Clients will transition to the new IPv6 network, which provides NAT64 and IPv6 DNS resolution services, using the same DNS name that points to the IPv4 address.
* The service provider will create a client-facing IPv6 interface with a new IPv6 virtual address that points to the same IPv4 DNS server.
* The service provider will support clients that use global IPv6 addresses and encapsulate IPv4 packets into IPv6 tunnels.
Which two migration solutions must the architect choose? (Choose two.)
- A. Use NAT44/64 from the devices to the core MPLS network.
- B. Use IPv6 tunneling from the devices to the core MPLS network.
- C. Use dual-stack lite from the MPLS network to the IGR.
- D. Use NAT44/64 from the MPLS network to the IGR.
- E. Use dual-stack lite from the devices to the core MPLS network.
Answer: D,E
NEW QUESTION # 179
Refer to the exhibit.
Refer to the exhibit. An engineer Is designing a redistribution solution for a customer. The customer recently acquired another company and decided to integrate the new network running RlPv1 with the company's existing network. Which redistribution technique must the engineer select to ensure the multipoint two-way redistribution does not cause routing loops?
- A. distribute-lists inbound under the RIPv1 process denying EIGRP learned prefixes
- B. distribute-lists outbound under the RIPv1 process denying EIGRP learned prefixes
- C. distribute-lists outbound under the EIGRP process denying RIPv1 learned prefixes
- D. distribute-lists inbound under the EIGRP process denying RIPv1 learned prefixes
Answer: B
NEW QUESTION # 180
A customer with an IPv4 only network topology wants to enable IPv6 connectivity while preserving the IPv4 topology services. The customer plans to migrate IPv4 services to the IPv6 topology, then decommission the IPv4 topology. Which topology supports these requirements?
- A. NAT64
- B. 6VPE
- C. dual stack
- D. 6to4
Answer: C
NEW QUESTION # 181 
Refer to the exhibit. An engineer must design an automatic failover solution. The solution should allow HSRP to detect a WAN 1 failure and initiate an automatic failover, making router R2 the active HSRP router. Which two solutions should the engineer choose? (Choose two.)
- A. use IP source routing
- B. use a floating static route
- C. Implement IP SLA on router R1
- D. Implement PBR on router R1
- E. Implement Enhanced Object Tracking on roster R1
Answer: C,E
NEW QUESTION # 182
......
300-420 certification exam is a very import component Cisco certification exam. But passing Cisco certification 300-420 exam is not so simple. In order to give to relieve pressure and save time and effort for candidates who take a preparation for the 300-420 Certification Exam, PrepAwayExam specially produce a variety of training tools. So you can choose an appropriate quick training from PrepAwayExam to pass the exam.
300-420 Exam Questions Fee: https://www.prepawayexam.com/Cisco/braindumps.300-420.ete.file.html
What's more, part of that PrepAwayExam 300-420 dumps now are free: https://drive.google.com/open?id=1r3OSLGOeqBF9_RXy4mtP5u7Ja3Ex4FE2
